oceanlogonew
>
Ocean Workshop Web Logo22

This web page has been replaced by a new site, www.engineeringandmarine.co.uk which will open in a new window. If your browser prevents this please enter the above www address in your browser to go to the new site, where you can purchase all the Oceaworkshop produucts. Thank you for your interest in Ocean Workshop
logo_ccAmex logo_ccDelta logo_ccElectron
logo_ccMC logo_ccSolo logo_ccSwitch
logo_ccVisa

bedding & Sealing compound

Zycore Bedding & Sealing

 

A high performance bedding and sealing adhesive  based on MS polymer technology, that is easy to apply and cures quickly. Used to seal and bed deck and hull fittings, seal windows and hatches. It bonds to metals, fibreglass, wood and most plastics.
310 ml

Instructions for use.

Ensure the surface is clean, dry and grease free.
Apply as required to one surface
Assemble parts by pressing into place leaving a minimum layer of 1 mm.
Remove excess and smooth exposed surfaces with water.
Zycore must be over painted within six hours of application. If painting outside six hours abraded with fine abrasive paper first.
Application temperature +5°C to +40°C
Skins in one hour, full cure 2-5 days depending on thickness.
 

£10.73

 

BACK
[Home]

Ocean Workshop is a division of E-Teck Ltd.
Copyright ©2007