oceanlogonew
>
Ocean Workshop Web Logo22

This web page has been replaced by a new site, www.eamp.co.uk which you will be redirected to automatically. If your browser prevents this please enter the above www address in your browser to go to the new site, where you can purchase all the Oceaworkshop products. Thank you for your interest in Ocean Workshop
logo_ccAmex logo_ccDelta logo_ccElectron
logo_ccMC logo_ccSolo logo_ccSwitch
logo_ccVisa

Marine Silicone black

Marine Grade Silicone Black

 

A marine grade silicone sealer and adhesive that can be used to fill small gaps and to seal around fittings. Highly durable and very resistant to salt water and UV.
78g

Instructions for Use

All surfaces must be clean, dry and free from grease. Remove nozzle and cut off the end of the cartridge, replace nozzle. Cut off the tip of the nozzle to give the required bead size, unclip the plunger and insert into the base of the cartridge and push. Smooth the sealer, if necessary, after about 2 minutes. To preserve the product remove plunger and clip to the side of the cartridge and wrap the end of the nozzle tightly with insulating or self amalgamating tape.
 

£4.97

 

BACK
[Home]

Ocean Workshop is a division of E-Teck Ltd.
Copyright ©2007