Carburettor Cleaner

A special aerosol cleaner designed to remove lacquers and varnish that build up on the inside and outside of carburettors which both reduce performance and increase fuel consumption. Carburettor Cleaner used after every 20 hours running or when performance starts to decline will restore full power and efficiency.
200 ml

Instructions for use.
Remove air cleaner to allow access to the top of the carburettor. Start the engine and spray Carburettor Cleaner slowly into the intake for about 5 seconds, do not spray too fast or the engine may stall, wait until the engine has returned to a smooth idle and then repeat. Take care when working with moving machinery. Switch off and spray the outside of the carburettor and linkage to remove dirt and oil.
Lubricate linkages with Rust Release Penetrating Lubricant.
Do not allow spray to come into contact with painted surfaces.

 

£3.55

BACK